Create configurators and interchanges:
Step 1. Product Type.(example: Single Row Deep Groove Ball Bearings Metric)
---------------------------------
Step 2. Company name.(Note: Keep short if possible, acronyms are ok if commonly used.)
---------------------------------
Step 3. Product Line series name.(Example: F-series, Note: this must be unique. Best to keep this short, some manufacturers never give a series name, if no series you can make an acronym from the product type-Company to keep it unique if manufacturers do not have a series.)
---------------------------------
Step 4. Enter Options for the Product Line series. This will create the configurator also known as a product selector.
---------------------------------
Step 5. Create interchanges for product line options.(Note: do this only after all companies product lines have been created for the Product Type.)
---------------------------------
Step 6. Genterate part numbers. Requires review from Bindygo.
Product Lines:
Double Row Angular Contact Ball Bearings Metric;
Company = NSK, Product Line: 3000-5000 DRACBB-NSK: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Double Row Angular Contact Ball Bearings Metric;
Company = NTN, Product Line: Angular Contact Ball Bearing-NTN: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Hydraulic Reservoir Breathers;
Company = Parker, Product Line: AB Series: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Actuator Pneumatic;
Company = SMC, Product Line: C(D)Q2-Z, Compact Cylinder, Double Acting Single Rod: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = Bosch Rexroth, Product Line: BSHP block only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = EWELLIX, Product Line: LLRHC block only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = Hiwin, Product Line: HG Series Heavy Load Ball Type block only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = INA, Product Line: KWVE carriage only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = Nippon Bearing, Product Line: SGL block and rail assembly: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = SCHNEEBERGER, Product Line: BMW block only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Ball Bearings, Square, Block Only;
Company = THK, Product Line: HSR block only: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Linear Slide Actuator;
Company = ModuSystems, Product Line: LSA: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Precision Linear Motor Stage;
Company = Parker Hannifin Corporation, Product Line: XLM Linear Motor Stage: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = Fafnir, Product Line: 2-3-91-93 Series SRDGBB-FAF: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = FAG, Product Line: 6000 Series SRDGBB-FAG: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = MRC, Product Line: S Type SRDGBB: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = NSK, Product Line: 6 Series SRDGBB: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = NTN, Product Line: 6 Series SRDGBB-NTN: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = SKF, Product Line: 6 Series SRDGBB-SKF: Step 4. Enter Options for configurator | Step 5. Create Interchanges
Single Row Deep Groove Ball Bearings Metric;
Company = Timken, Product Line: 6000 Series SRDGBB: Step 4. Enter Options for configurator | Step 5. Create Interchanges